Achieve professional results when pressing flowers with this set of 6 A4 plant fiber absorbent boards. Made from natural plant fibers and silicone layers, these boards are highly effective at drawing moisture from flowers and specimens, ensuring beautifully pressed results every time. Each board weighs approximately 109 g when dry and can handle most types of flowers.

✨ Product Highlights

🌿 Set of 6 A4 plant fiber absorbent boards for pressing flowers and specimens
📏 Each board weighs ~109 g when dry
3mm in thickness, 20*30cm in size
💧 Super effective moisture absorption – works on most flower types
🎨 Ideal for botanical crafts, scrapbooking, resin art, and DIY pressed flower projects
🌸 Reusable – boards can be reactivated after use via microwave, oven, or fruit dehydrator
🚫 For decorative and craft use only – not edible

🧊 Storage & Care Instructions

Store in a cool, dry place away from moisture and direct sunlight
Reactivate boards before reuse to maintain effectiveness
Handle carefully to avoid tearing

📦 Packaging Info

Packed securely to protect the boards during shipping

🌿 6 Pcs A4 Plant Fiber Absorbent Boards – For Pressing Flowers & Drying Specime

Name: 🌿 6 Pcs A4 Plant Fiber Absorbent Boards – For Pressing Flowers & Drying Specime
SKU: ABSORBENTPAPER
Price: 50 AUD
Availability: InStock

庫存單位： ABSORBENTPAPER

AU$50.00

增值税未含

數量

If you need to expedite the drying of absorbent paper boards after pressing flowers, you can use certain appliances with caution. Here’s how to use an oven, iron, or microwave for this purpose:

1. Oven:

Preheat: Set your oven to the lowest temperature possible, typically around 60°C (140°F). Higher temperatures can damage the boards.

Prepare the Boards: Place the absorbent paper boards on a baking sheet or directly on the oven rack.

Drying: Put the boards in the oven and monitor them closely. Check every 10-15 minutes to ensure they’re drying evenly and not overheating. Turn them occasionally for even drying.

Cool Down: Once they’re dry, turn off the oven and let the boards cool down inside before removing them.

2. Iron:

Set Temperature: Heat the iron to a low setting without steam.

Prepare the Boards: Place the absorbent paper boards on a flat, heat-resistant surface.

Cover: Put a thin cloth or paper towel between the boards and the iron to protect the boards from direct contact.

Press Gently: Gently press the iron over the boards in a circular motion. Be careful not to apply too much pressure or heat.

Check: Lift the cloth and check the boards frequently to avoid overheating. Flip the boards as needed.

3. Microwave:

Prepare: Place the absorbent paper boards between two microwave-safe paper towels or a microwave-safe plate.

Heat: Microwave on a low setting for short intervals, such as 30 seconds at a time.

Check: After each interval, check the boards for dryness and adjust the time as needed. Be cautious of overheating and potential sparks.

Cool Down: Allow the boards to cool down before handling them.

General Tips:

Avoid Overheating: Overheating can warp or damage the boards, so always use low temperatures and monitor the process closely.

Ventilation: Ensure proper ventilation to avoid moisture buildup and ensure even drying.

Using these methods, you can efficiently dry your absorbent paper boards after pressing flowers while maintaining their effectiveness.

🌿 6 Pcs A4 Plant Fiber Absorbent Boards – For Pressing Flowers & Drying Specime

How to reactivate the absorbent paper boards?